CRL GEN344MBL Matte Black Adjustable Wall Mount Offset Back Plate Hinge

The CRL Adjustable Geneva Series has taken our popular Geneva Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90 degrees inward and 90 degrees outward (adjusting the angle from the factory set position will reduce the 90-degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb. SPECIFICATIONS: Glass Thickness: 5/16" to 1/2" (8 to 12 mm) Tempered Safety Glass Special Features: Adjustable to any angle up to 90 degrees without having to take the door down Construction: Solid Brass Hinge Swings: 90 degrees in and 90 degrees out (at factory set position) Closing Type: Self-Centering when within 15 degrees of closed position Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass. NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details. Product Warning: CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

• Adjustable to Any Angle up to 90 Degree without Having to Take Door Down
• Use Monolithic Tempered Glass